Всех приветствую!!!
Прошу помощи, консоль я первый прошиваю, не понимаю, в чем может быть проблема? Спасибо за ответ 🤝
После нажатия ‘Create XeBuild Image’, пишет вот это:
XeBuild Initialized
Kernel Selected: 17559
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.21.810
---------------------------------------------------------------
base path changed to D:\XBOX Freeboot\J-Runner-with-Extras\xeBuild
---- { Image Build Mode } ----
building glitch2 image
***** WARNING: nanddump.bin has a bad LBA at block 0x1 (raw offset 0x4200), block LBA ignored
***** WARNING: nanddump.bin has a bad LBA at block 0x2 (raw offset 0x8400), block LBA ignored
***** WARNING: nanddump.bin has a bad LBA at block 0x3 (raw offset 0xc600), block LBA ignored
***** WARNING: nanddump.bin has a bad LBA at block 0x4 (raw offset 0x10800), block LBA ignored
***** WARNING: nanddump.bin has a bad LBA at block 0x5 (raw offset 0x14a00), block LBA ignored
...
***** WARNING: nanddump.bin has a bad LBA at block 0x4e (raw offset 0x141c00), block LBA ignored
***** WARNING: nanddump.bin has a bad LBA at block 0x4f (raw offset 0x145e00), block LBA ignored
***** WARNING: could not find a non-zero CF LDV to use, setting it to 1 but that may be incorrect!
done! fsroot found ok!
**** could not read kv.bin (-1) ****
******* ERROR: critical bootloader files are missing, cannot proceed!
***** FATAL BUILD ERROR: -1 unable to complete NAND image
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Помогите пожалуйста 🙏🙏🙏
